Your Furnace Can Make You and Your Home Toast

How old is your furnace? When was the last time it was inspected by a professional? Did you know the Gas Company will inspect your furnace for free? When was the last time it was cleaned? Has it needed recent repairs? Is your furnace safe to use? If you have answered yes or not to any of the questions read on.

When you have an old furnace you need to give it tender loving care. It can heat up your home and never talk back or it can become a living nightmare in a matter of minutes.

There are many parts to your furnace that can lead to a speedy disaster for you and your family. I strongly advise you to have your furnace inspected now!

My sister’s old furnace was repaired a month ago. The part was replaced and heat once again filled her home. Less than a month later her furnace needed another repair. The repair was made and a few days later the smoke detector alarm started shrieking. Thankfully it was not a fire with flames but it was a vicious, black, thick smoke fire.

The fire would have killed her and all the family members within four minutes. Yes ladies and gentlemen that fast.

Please have your furnace checked by a professional immediately. Call your local Gas Company they will inspect your furnace for free and give you wonderful advice about purchasing a new one if needed.

Make sure you clean your filters. Maybe all your furnace needs is a good cleaning. There are professionals available to assist your every need.

Safety is the word of the day. A furnace is a wonderful comfortable, cozy, warm, snuggly heating system but it can turn deadly on you without warning.

Thank you for reading my article. Please feel free to read any of my numerous articles.

How old is your furnace? When was the last time it was inspected by a professional? Did you know the Gas Company will inspect your furnace for free? When was the last time it was cleaned? Has it needed recent repairs? Is your furnace safe to use? If you have answered yes or not to any of the questions read on.

When you have an old furnace you need to give it tender loving care. It can heat up your home and never talk back or it can become a living nightmare in a matter of minutes.

There are many parts to your furnace that can lead to a speedy disaster for you and your family. I strongly advise you to have your furnace inspected now!

My sister’s old furnace was repaired a month ago. The part was replaced and heat once again filled her home. Less than a month later her furnace needed another repair. The repair was made and a few days later the smoke detector alarm started shrieking. Thankfully it was not a fire with flames but it was a vicious, black, thick smoke fire.

The fire would have killed her and all the family members within four minutes. Yes ladies and gentlemen that fast.

Please have your furnace checked by a professional immediately. Call your local Gas Company they will inspect your furnace for free and give you wonderful advice about purchasing a new one if needed.

Make sure you clean your filters. Maybe all your furnace needs is a good cleaning. There are professionals available to assist your every need.

Safety is the word of the day. A furnace is a wonderful comfortable, cozy, warm, snuggly heating system but it can turn deadly on you without warning.

Thank you for reading my article. Please feel free to read any of my numerous articles.

Copyright Linda E. Meckler 2007

Linda is the author of her first published book, “Ghost Kids Trilogy. "Christy, 12 and her Brother Brad, 16 moves into an old house on top of a mountain and meet two Ghost Kids.

Then we have a mysterious, magical Blue Vase where Uncle Charlie the villain is trapped. He wants out of the Blue Vase and exchange he will tell Christy and Brad where Pirates’ Treasure is Hidden.

Take a walk with Christy and Brad down a dark hall hunting for Pirates” Treasure. You will think were you there right there with them.

Love, Family Values and Charity burst off the pages. http://www.lmeckler.com

Check out my new 4 E books Titled:

How To Appeal Medical Bills

Appeal and Collections Letters for Medical Providers

Boost Your Self Esteem and Blossom

Computers Cause Pain on my website http://www.lmeckler.com/store

Check out my website http://www.lmeckler.com

Building A Hobby Crucible Furnace

Efficient melting of metal in the hobby foundry requires a simple, but well designed, easy to operate melting furnace. A well-designed furnace does not necessarily mean it will be expensive to build, or that it is complicated to construct and operate.

If you're just beginning your metal casting journey, there will be a multitude of questions that will need to be answered; and if you follow some simple methods, your learning curve will be dramatically reduced.

A well-built furnace will take you another step along the path to being able to maintain an important piece of equipment for your hobby foundry set up. Without an efficient furnace your hobby metal casting experience could well be one of total frustration & disappointment.

It is possible to build a furnace from scrap materials found around the workshop. This is not to say that it will look trashy, or poorly made, the point being made here is that you do not need to build everything from new materials. The only material you will need to buy is the special high temperature resistant refractory to line the furnace walls with, plus a few brass connectors from the local plumber for the gas feed line and some brass rod to custom-make your own special gas jet for the burner. The rest you can quite easily make yourself if you have metal working skills.

One of the biggest problems the hobby foundry worker has to overcome, is to acquire the knowledge to build a high-energy output burner, the subject of burners can raise many arguments amongst hobby foundry workers, and there is a straightforward solution to building an efficient burner, by following simple instructions any practical person can fabricate an efficient burner that will quickly melt metals such as aluminium and bronze without effort. The process to build a high output furnace burner is really quite simple, but there are a few small parts that need to be machined on a lathe.

If you don't have the luxury of a lathe in your workshop, perhaps a friend can help you out. Although, many hobby metal workers do own a metal lathe these days, it is almost a must have for the average home engineer in this ever-increasing DIY age. You will also need a MIG or ARC welder (Max 180 Amp) to fabricate the furnace.

Be very careful with your gas pipe & joint connections, although there are no great line pressures involved with the gas feed to the burner, but any small leak could lead to the possibility of a dangerous explosion.

Propane gas expands between sixty and one hundred times once exposed to air. So be aware, gas is the most efficient fuel you can use to fire a crucible furnace, but it can also be an extremely dangerous material. You need to follow any building instructions carefully and not be tempted to take any shortcuts as they may lead to personal injury.

If you are a resourceful, practical person, you could build your own crucible furnace for less than $70.00US, this is a mere fraction of the cost of a commercial unit, and should be equally as efficient, and provide many years of reliable melting service.

Like many things in life, you can learn from established proven methods, or you can spend many months floundering around by yourself, not knowing what to do. To dramatically reduce your journey to metal casting success; learn from fourteen years of metal casting success, visit our web site now. http://www.myhomefoundry.com