Heating System School & Furnace Repair Training Opportunities

Heating and climate control systems are installed in virtually every residential and commercial building in the United States, and as the population grows, so will the number of Heating and climate control systems in use. This is one of the major reasons that the US Department of Labor list the HVAC job field as one of the fastest growing job markets in the United States through 2014.

With major heating system technician job market expansion comes a greater demand for trained heating service people. Heating System Training courses, which can be taken to become a Certified Heating System service person are quite cost effective and can be completed in as few as a few months. Many technical schools and trade schools offer heating repair training and heating installation classes. It is important that you choose the right heating school for your needs. It is suggested that you research your heating school training options and find a school that offers all of the following services:

• Hands on heating system and furnace training
• On site heating repair training
• Credits acknowledged by University of Phoenix and many other universities and technical/trade schools
• An experienced faculty and staff with industry experience
• Financial aid assistance
• Graduate placement assistance programs

Courtesy The Refrigeration School Inc Learn More About Heating System Schools

Both residential and commercial buildings are serviced by heating mechanics that must carry out installations, service the systems, and provide the needed repairs. Furnace installers, other wise known as heating equipment technicians, use the blueprints and specs to put in oil, gas, electric, solid-fuel, and multiple-fuel heating systems. Once the central equipment is set up, technicians will also put in fuel and water lines, ducts and vents for air, and pumps along with other parts as needed. Technicians will ensure that the system is performing properly, as well as making the proper connections between wires and their controls. A combustion test using carbon dioxide or oxygen testers will be used to check that the system is indeed working as desired.

In addition to furnace installations, heating techs will maintain and repair maintenance and the system as needed to make sure it is functioning properly. For example, technicians will make adjustments on the burners and blowers during the fall and winter because they are used the most during those seasons. When a system is failing, the thermostat, burner nozzle, and controls will be inspected in an attempt to identify the problem.

Whether this is your first job, a career change to a better job or the ability to upgrade your current job, The Refrigeration School, Inc (RSI) iof Phoenix AZ s an essential stepping-stone in your career path. RSI does not offer a simple "job placement" service but instead, we help you develop your career and give you the tools and strategies you need to take advantage of career opportunities.

The Refrigeration School, Inc or RSI trains you in the technical services that are needed today including Heating Repair training and Heating System school. RSI offers not only HVAC training but also assistance in seeking financial aid and our Placement Assistance staff works with each graduate to find the right employment.

Not Changing Your Furnace Filter Can Be Dangerous - Don't Become A Statistic

We have all heard the horrifying story about the family that just barely escaped with their lives, or even worse the family that died in their sleep, there lives ended by a silent killer. The silent killer is CO (Carbon Monoxide). If you don't change or maintain your furnace filter as recommended by the manufacturer you could be putting your family in danger. Your furnace filter is designed to remove dust from air as it passes through your furnace. The longer your furnace filter is installed the dirtier it becomes. This increased loading of the filter with dust causes a resistance to air flow through the filter and reduces air flow.

Gas and oil furnaces, like all heating and air conditioning equipment, are designed to have a certain amount of air flow at all times to operate properly and at highest efficiency. This air flow is measured in CFM (Cubic Feet per Minute). These appliances have a heat exchanger which has the heat source, flame, inside and the air passes over the heat exchanger on the outside. As the air passes over the heat exchanger it picks up the heat from the flame inside.

To get maximum efficiency from these systems the walls of the heat exchanger are made as thin as possible but not so thin that they cannot withstand the heat that they are subjected to during normal operation. This brings us back to the fact that these appliances are designed with minimum air flow requirements.

A furnace filter that remains in the system so long that it begins to negatively impact air flow can be dangerous. As the amount of air flowing over the heat exchanger declines, the operating temperature of the heat exchanger increases. This is when heat exchanger can crack because they are operating above design conditions. The hotter the heat exchanger gets the more it expands when heating and contracts as it cools during the off cycle. This expanding and contracting can become excessive and cause the metal of the heat exchanger warp or crack. A cracked heat exchanger can cause combustion gases to mix with the air in your home.

The good news is that properly designed furnaces have high limit switches that prevent excessive heating of the heat exchanger. These limit switches monitor the temperature at or near the heat exchanger and if the temperature reaches a predetermined set point, the unit will be shut off either until manually reset or until the limit switch senses that the temperature is within safe limits and resets automatically.

A furnace can operate a long time on an auto reset limit switch without anybody even knowing. This means that the furnace is operating at the limits of its design capabilities. Today most limit switches are the manual reset type, designed this way so that the furnace will not operate until it is serviced and the problem corrected.

Don't rely on these safety switches to protect you from disaster. These are mechanical devices which can and do fail to operate properly at times. So reduce your risk by maintaining your furnace filter properly. This means cleaning or changing your furnace filter regularly. It is always best to follow manufacturers guidelines.

Visit us for furnace filter reviews and articles to help you determine which furnace filter is best for your needs. Take part in surveys or have your questions answered

The Benefits of Owning a Wood and Coal Burning Furnace

Americans love having options. Options allow us to select the outcome of a particular situation. An option may be a small as what to have for lunch or as large as how to heat a home. Americans looking to heat their homes have a number of home heating options and that is something that is very pleasing for many.

With the high cost of gas there are many individuals who automatically eliminate it as a home heating method. With gas eliminated that leaves coal, wood, and electricity. There are a number of benefits to heating your home with electricity, but there are also benefits to heating your home with wood or coal. For this reason, there are many homeowners who make the decision to purchase a wood furnace or a coal furnace. What if there was an option that would allow you to have both? That option is what is known as a wood and coal burning furnace.

A wood and coal burning furnace is a combination of each individual furnace. Many times the furnace is used as a wood furnace, but there is always the option of using the coal.

Most wood and coal burning furnace owners use the coal only as a secondary backup. If coal is never used in a wood and coal burning furnace it is still nice to have the option to use it if need be.

Having a choice may be the greatest benefit of owning a wood and coal burning furnace, but there are additional benefits. Another one of the most popular benefits of owning a wood and coal burning furnace is the money that could be saved. Using wood and even coal to heat your home is often drastically cheaper than the cost of heating a home with gas. A wood and coal burning furnace can provide cheap home heating for houses of all sizes.

Another benefit of owning a wood and coal burning furnace is the safety that it provides. Since wood and coal burning furnaces are outdoor furnaces they are likely to reduce the risk of a house fire. It is possible for an outdoor furnace to be installed close to the home, but it is often safer when it is a small distance away. The chances of a fire occurring in an outdoor furnace is slim, but if one should occur it can’t spread to the home if it is not right next to it.

As you can see, there are a large number of benefits to owning a wood and coal burning furnace. In fact, the above mentioned benefits are just a few of the many. If you are interested in learning the additional benefits of owning a wood and coal burning furnace then you should get browsing. Simply by reviewing product descriptions and pictures you should be able to see why there are an unlimited number of benefits to owning a wood and coal burning furnace.

Erik Holden
Get a great deal on a wood and coal burning furnace