Tips For Buying A Furnace

A furnace is a device found in the home used for heating. There are several types of furnaces available. A central heating device is found in most homes and distributes warm air throughout the house, heating it. A stove is typically a large appliance where wood is burned to generate heat in the area. Room heaters are small, electrical appliances that provide heat to a small space. Most houses have some form of central heating and some people have a stove. Many people opt for a stove as a decorative piece but it is rare to see one nowadays for use as the prime heating source. If you are thinking of replacing a furnace or buying a new one, there are several things to consider.

Size

The size of your home will dictate the size of the furnace needed. If the furnace is too small to accommodate your needs, it will have to work harder to heat the home. Purchasing a furnace that is too large can be inefficient and they are typically more expensive. The overall use of the furnace will increase energy costs. Request a load calculation before choosing the furnace for your home. This will help determine the proper size. If replacing a furnace, do not simply go with a model that is similar to the old one. Instead, do some research as the one that came with the house may not have been the proper size.

Efficiency

High efficiency furnaces can be very expensive. The payoff, though, is in the long run because they will eventually save you money on heating bills. If you live in a colder climate where the heater will be running for extended periods of time, investing in a high efficiency model may be ideal. If, however, you do not often use the system often, a less efficient model will likely save money. In order for the investment to pay off, you will have to calculate the energy savings with the additional cost of the unit. Sometimes this may take a long time to be beneficial.

Cost

After determining the size and efficiency of the unit needed, begin researching costs. Also take into consideration installation which is typically performed by a licensed HVAC contractor. Shop around for the best possible price and get several quotes for comparison. Choose the one that has the best costs with the desired features.

Buying a furnace can help reduce energy costs while keeping your home warm during cold weather. With a little research, buying a new furnace does not need to be difficult. Ensure you are buying the proper size furnace for your home. Determine the level of efficiency that will save the most money. Then, shop around and get quotes for the best price.
Gray Rollins is a featured writer for FurnaceWorks.com. To learn more about buying a furnace and furnace costs, visit us.

Home Heating - Furnaces to Space Heaters, Inspections are Important

The thought of snow, cold and blowing winds lead to thoughts of warm blankets, furnaces and glowing fires. Home heating is a very important subject in most parts of the country, everything from furnaces to space heaters are used to keep the house toasty warm for our return from the "frozen tundra."

The heating sources that are used can lead to dire consequences if used improperly. Space heaters, for example are responsible for numerous house fires every year. The use of these devises for home heating requires responsibility and constant awareness of the safety issues they present. However, the use of space heaters can be a way to lower heating costs when the price of heating fuel rises by allowing you to use electricity instead.

When shopping for a space heater look for a model that stays cool to the touch and that has a wide base. These two options will make the heater safer to operate. Never use a space heater around a child, even if that child is asleep, the effect of a burn from the unit can be devastating. The chance of a child waking up and stumbling into the heater causing it to tip over and catch on fire is too great to risk.

When preparing your home heating plan for the winter season, it is not enough just to turn the furnace on and hope for the best, it needs to be serviced on a yearly basis to ensure its safety and reliability. Without this inspection, you could, literally be playing with fire.

The furnace inspection will consist of a visual inspection, cleaning of the furnace, detection of carbon monoxide (CO) as well as the checking the burner, ducts and pilot light. This is a short list of what an inspection consists of, but is a good indicator of what to expect when the licensed professional knocks on your door.

The visual portion of the inspection will help to detect any cracks that may exist in the heat exchanger. These cracks may result in the leakage of carbon monoxide fumes into the home. The flue will also be tested for the reason of detecting carbon monoxide (CO) gasses that may leak from the furnace. To be on the safe side, it is best to install a carbon monoxide (CO) detector in the main sleeping areas of the home to warn of a possible danger.

The inspectors will also be cleaning the furnace ducts of dust that has accumulated throughout the summer. Dust can be combustible therefore, it is necessary to remove it before starting the furnace. The burner and pilot light will also be inspected to ensure that they are working properly.

Follow these tips when heating your home this winter and sleep peacefully at night knowing that you have done you duty to protect your family, when they are snuggled in their beds as well.

Linda Moore writes on a variety of subjects including home ownership, family matters, travel, personal enrichment, lowering your heating bills and home air purifiers

Got Trees? An Outdoor Wood Furnace Will Cut Your Energy Bills Down To Size

If you live in a suburban or rural area near a source of cheap wood, you could heat your home for the entire season for the cost of one month’s electric heat bill. An outdoor furnace requires less tending, eliminates respiratory problems caused by burning wood indoors, and keeps the wood burning mess outside.

There are a surprising number of outdoor furnace manufacturers with a wide range of styles and designs to accommodate different heating capacities and fuel sources. Some of these furnaces have the capacity (500k Btu) for commercial applications.

Burns Best makes a corn or wood pellet version. Taylor Waterstoves has a multi-fuel model that burns coal or wood. Hardy Manufacturing makes an all stainless steel furnace with a built in hot water exchanger.

One of the selling points of an outdoor furnace is the convenience of locating it near the wood fuel source. Since the water heated by the furnace is pumped to your home through insulated, underground piping, the furnace can be set up as close as 2 feet, or as much as 500 feet from your house.

All outdoor furnaces are designed to work with any existing heating system and can be thermostatically controlled. If you have a forced air system, you can use the existing duct work but you will need to install a water-to-air heat exchanger in your furnace. Your furnace is still available as a back up.

If you already have radiant floor heating, you would connect the underground feed from the outdoor furnace to the existing circulating pump.

For radiant baseboard heat, you can connect the piping directly to an existing boiler or install a water-to-water heat exchanger. By adding the water-to-water exchanger, you receive the added benefit of free hot water while the existing furnace functions as back up.

An outdoor boiler can even be used to heat your swimming pool, driveway, work shop, greenhouse, or multiple buildings.

The firebox designs vary from manufacturer to manufacturer, but all are constructed from stainless or carbon steel. Although each manufacturer claims to be using a grade of stainless steel superior to the competition, they all agree that heat transfer efficiency is almost 3 times better with 16 gauge stainless steel than with 3/8" carbon steel. An all stainless steel firebox also resists rusting and burnout that occur in standard carbon steel.

Some fire boxes are large enough to accommodate a 30” diameter by 72” log. The problem I would have is getting a log that size into the firebox. Normally, outdoor furnaces are loaded twice a day. Burn times per load vary from 12 to 96 hours depending on what you’re heating, the outside temperature and how well your house is insulated.

One trait all outdoor furnaces have in common is versatility. What ever your heating needs are or the type of fuel you burn, it’s possible to design a system for any heating scheme you can imagine.

Alternative-Heating-Info.com offers a unique look into geothermal heating and cooling, radiant heating, solar heating systems and pellet burning stoves

How You Can Benefit from an Outdoor Wood Furnace

In today’s society, many prices are on the rise. Unfortunately, the income of most individuals remains the same. Many individuals and families are finding it difficult to afford a number of necessary things, such as heat and hot water. If you are one of those individuals, or even if you would just like to save money, you may be able to benefit from the use of an outdoor wood furnace.

Many individuals have heard of an outdoor wood furnace before. Outdoor wood furnaces have been used for years now, but until the recent increase in energy costs, many individuals were unfamiliar with what they are. In recent years, the sales of outdoor wood furnaces have increased. There is a good reason for that increase, cheaper heating costs.

Cheaper heating costs are just one of the many ways that you can benefit from the use of an outdoor wood furnace, but, perhaps, it is the most important. When financial trouble arises, many individuals try to cut out unnecessary expenses. These expenses are likely to include meals away from home, movies, and additional entertainment. Unfortunately, home heating and hot water is not something that can be eliminated. For many individuals, an outdoor wood furnace is just a way to save money, but for others it is a way to survive.

A large number of homeowners need to heat more than their home. If you have a garage, barn, or shed, those facilities can also be heated with an outdoor wood furnace. This means that you do not have to spend your days in your garage, shed, or barn without heat. This is something that many individuals which to achieve, but many are worried about the cost of doing so. Depending on the size of those buildings and the outdoor wood furnace you select, you may be able to heat a number of facilities with just one unit.

By using an outdoor wood furnace to heat your home, you are also investing in a heating method that is relatively safe. It is important to note that all heating methods have some risks. Little incidents have been reported with outdoor wood furnaces. You will also find that many manufactures and dealers recommend that you place your furnace a safe distance away from your home. This distance will significantly reduce the danger of using an outdoor wood furnace.

In addition to being safe, in a general capacity, you will find that many outdoor wood furnaces are safe for those with young children. The main structure of an outdoor wood furnace should be placed off the ground. The controls are often placed in a secure location, out of the reach from many children. This means that if you are a parent, you can rest assure knowing that your wood burning furnace should not pose any risks to your children.

The above mentioned examples are just a few of the many ways that you may be able to benefit from the use of an outdoor wood furnace. For additional benefits, you are encouraged to take a closer look at outdoor wood burning furnaces. You can easily do so by speaking to a product manufacture or dealer, such as Hawken Energy.

Brad King is a writer for Hawken Energy where you can find a great deal on a outdoor wood furnace